NEC NF2900-SR40E, User Manual

Page: 49 / 168

32
(3) Connection between array controllers and FC disk enclosures
Push the connector of the FC cable (HSSDC-HSSDC) provided with the disk enclosure, or the
available optionally FC cable (HSSDC-HSSDC) into the FC connector (DP0) for the disk enclosure of
the controller 0 (CONT0) until a click is heard.
Push the connector at the other end of the FC cable (HSSDC-HSSDC) into the FC-IN connector on
Adapter 0 (ADP0) of the disk enclosure until a click is heard.
Similarly, connect the FC connector (DP0) for the disk enclosure of the other controller 1 (CONT1) to
the FC-IN connector on Adapter 1 (ADP1) of the disk enclosure.
Connect the DP1 connector on Controller 0 (CONT0) and DP0 connector on Controller 1 (CONT1) to
the other FC disk enclosure/SATA disk enclosure.
If you have attached the DE port NF2900-SP02E to the NF2900-SR40E, use the FC cable
(HSSDC-HSSDC) provided with the DE port or available optionally CONT-DE cable
(NF9120-SJ43E). Push the connector at one end of the cable into the FC connector (DP2) of the disk
enclosure on the DE port of Controller 0 (CONT0) until a click is heard.
Push the connector at the other end of the FC cable (HSSDC-HSSDC) into the FC-IN connector on
Adapter 0 (ADP0) of the FC disk enclosure until a click is heard.
Similarly, connect the FC connector (DP2) of the disk enclosure on DE port installed in the other
controller 1 (CONT1) to the FC-IN connector on Adapter 1 (ADP1) of the FC disk enclosure.
Connect the DP3 connector of the DE port installed on Controller 0 (CONT0) and DP3 connector of
the DE port installed on Controller 1 (CONT1) to the other FC disk enclosure/SATA disk enclosure.