60
(5) Installation of cache memory
Install additional cache memory in the controller.
Perform the following procedure for installing cache memory in the controller:
Open the socket levers, and install the cache memory, fitting the two recesses of the cache memory
to the protrusions of the socket.
Confirm that they are seated properly. Until the cache memory is secured by the levers, push the
cache memory along the connector rail as far as it will go. Be careful not to apply excess force to
the cache memory in doing so.
When the levers fit into the notches of the cache memory, secure it.
When installing the additional cache memory into the controller, push it as far as it will
go and then secure it with the levers.
Incorrect insertion may cause a malfunction.
Summary of Contents for NF2900-SR40E
