NEAX2000 IVS
2
General Description
Page 70
NDA-24293, Issue 2
Tie Line Tandem Switching
Chapter 5 Feature Description
Tie Line Tandem Switching
This feature allows trunk-to-trunk connections through the NEAX2000 IVS
2
without
the need for any Attendant assistance or control. The major use of this feature is in
association with a dial tandem tie line network to allow tie line connections and
incoming tie line calls automatic access to, and completion of, local Central Office
calls.
Timed Queue
When a user originates an outgoing trunk call and the called party is busy or does not
answer, the caller can set the Timed Queue feature. When this feature is set, the trunk
seizure is repeated and the number is redialed after a predetermined time interval.
Timed Reminder
This feature allows the system to be programmed to automatically call stations at
specified times. Upon answering, the station is connected to a recorded announcement
or music source.
Trunk - Direct Appearances
This feature allows Multiline Terminal users the ability to access a CO line or E&M
Tie Line without dialing an access code. For this feature, trunks must be assigned to
the line keys on the Multiline Terminal. Incoming calls on CO lines can be answered
on the appropriate trunk line appearance.
Trunk Queuing - Outgoing
This allows a station user, upon encountering a busy signal on a trunk, to dial a feature
access code and enter a first-in, first-out queue. As soon as an outgoing trunk becomes
available, stations in the queue will be called back on a first-in, first-out basis.
Trunk-to-Trunk Connection
This feature provides any station user with the ability to conference together two
outside trunk calls and abandon the connection without dropping the Trunk-to-Trunk
Connection.