NEAX2000 IVS
2
General Description
Page 72
NDA-24293, Issue 2
Uniform Numbering Plan (UNP) -Voice and Data
Chapter 5 Feature Description
Uniform Numbering Plan (UNP) -Voice and Data
In the numbering plan for a network to be configured through the use of Tie Lines, a
Uniform Numbering Plan (UNP) is employed. When UNP is employed, a station user
from any PBX within the network can call a desired party by using a uniform dialing
method based on the UNP.
Variable Timing Parameters
This feature gives the IVS the versatility to change timing duration using the
Maintenance Administration Terminal (MAT) or the Customer Administration
Terminal (CAT). All timing parameters are set initially in the Resident System
Program. These timing parameters can be changed according to the customer's
requirements.
Voice Guide
This feature provides a station user with an announcement that informs:
1. The result of the operation when the station user set or canceled the service fea-
ture, instead of service set tone.
2. Which service has been set to the station; such as, Call Forwarding - All Calls, Do
Not Disturb or Message Waiting, when the station goes off-hook, instead of
special dial tone.
Voice Mail Integration
This feature is used to interface the NEAX2000 IVS
2
with a locally provided
stand-alone type Voice Mail System (VMS). The VMS, connected to the NEAX2000
IVS
2
single line circuit (LC), is controlled by sending/receiving DTMF signals using
this LC.
The VMS’s voice mail feature can be used by accessing this VMS directly from an
extension. If a station sets its call forwarding destination to the VMS, calls to this
station are connected to the VMS, and the messages can be registered according to the
VMS instruction. In addition, the Message Waiting lamp of the station can be turned
on automatically by the VMS.
Voice Mail Private Password
Voice Mail Password can be prevented from displaying in LCD of Multiline
Terminals when connected to the Voice Mail System.