NEC NEAX2000 IVS2 General Description Manual Download | Manualshive

Page: 72 / 106

background image

NEAX2000 IVS

2

General Description

Page 48

NDA-24293, Issue 2

Call Park

Chapter 5 Feature Description

Split Call
Forwarding - No
Answer

This feature allows internal and external calls, to extensions that do not answer, to be
rerouted to separate destinations individually.

Call Forwarding -
Override

This feature allows the call forward destination station to call the station which set call
forward. The call forward setting will be ignored.

Group Diversion

This feature allows all calls terminated to an extension that are not answered within a
predetermined time to be forwarded to a pre-designated station.

Call Park

This feature enables a station user or attendant to place a call into pre-designated Call
Park locations. The station user or attendant is then free to process other calls. This
feature is available system wide and for individual tenants.

Call Park - System

When a call is parked by Call Park-System, the call can be retrieved from Call Park by
any station in the system.

Call Park - Tenant

When a call is parked by Call Park - Tenant, the call can be retrieved from Call
Park-Tenant by any station within the tenant from which the call was originally
parked.

Call Pickup

This feature enables a station user to answer any call directed to another station, to a
station within the user's own Call Pickup Group, or to a station within a different Call
Pickup Group. Three Call Pickup methods are available: Call Pickup - Direct, Call
Pickup - Group, and Call Pickup - Designated Group.

Call Pickup - Direct

This method permits a station user to pickup a call to any other station in the system
by dialing a specific Call Pickup feature access code and the number of the called
extension.

Call Pickup -
Group

This method permits a station user to answer any calls directed to other extensions in
their preset pickup group by dialing a Call Pickup - Group feature access code.

Call Pickup -
Designated Group

This method permits a station user to answer an incoming call directed to another
group by dialing the Call Pick-up - Designated Group feature access code and any
station within the group to which the ringing station belongs.

«
...
70
71
72
73
74
...
»

Summary of Contents for NEAX2000 IVS2











































































































Reviews:

No comments

Related manuals for NEAX2000 IVS2

Netfinity 6000R

Brand: IBM Pages: 218

eserver xSeries 440

Brand: IBM Pages: 74

eserver xSeries 440

Brand: IBM Pages: 98

eserver xSeries 440

Brand: IBM Pages: 84

Eserver xSeries 360 Type 8686

Brand: IBM Pages: 184

eserver xSeries 350

Brand: IBM Pages: 62

eServer xSeries 135

Brand: IBM Pages: 62

eserver pSeries 690

Brand: IBM Pages: 212

System x3690 X5

Brand: IBM Pages: 32

System x3690 X5

Brand: IBM Pages: 33

System x3690 X5

Brand: IBM Pages: 180

Brand: IBM Pages: 1032

Brand: Lantronix Pages: 10

Brand: Lantronix Pages: 17

Brand: Lantronix Pages: 109

Brand: Lantronix Pages: 24

Brand: Lantronix Pages: 29

Brand: Lantronix Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands