NEC NEAX 2400 IPX, Programming Manual

Page: 244 / 316

CHAPTER 6 NDA-24305
Page 226
Revision 1.0
EVENT BASED CCIS - ISDN TRANSPORT
Examples of Data Assignment for the E-CCIS line
• Example of port allocation when using Called Sub Address as addressing information
Note
Data assignment procedure related to the E-CCIS line is shown below.
STEP 1: ARTD - RT20 CDN 45 A/D: 0 (Voice information is transmitted)
CDN 49 TRKS: 0 (Select the trunk (CIC No.) in ascending order)
CDN 66 DC: 4
Note
RT120 CDN 66 DC: 4
Note
Note: The same value in “DC” assigned for ISDN B channel must be programmed to both E-CCIS Signal and
Speech route (RT10-CDN66 DC: 4).
STEP 2: ARTI - RT20 ECCIS: 1 (E-CCIS Route)
ECCISTM: 5 (Release timer: 5 minutes)
ECCISOB: 1 (OG billing for the E-CCIS line is required)
ECCISIB: 1 (IC billing for the E-CCIS line is required)
ECCISTD: 1 (Addressing information: Sub Address)
RT120 ECCIS: 1 (E-CCIS Route)
ECCISTM : 3 (Release timer: 1 minute)
ECCISOB: 1 (OG billing for the E-CCIS line is required)
ECCISIB: 1 (IC billing for the E-CCIS line is required)
ECCISTD: 1 (Addressing information: Sub Address)
DID Number for incoming calls from an E-CCIS line: 0471-81-3500
DID Number for incoming calls from an alternate route: 0471-81-3600
24PRT
RT110 TK1 ISDN D-channel
RT120 TK1 E-CCIS Signal Channel Sub Address: 9803
RT20 TK3 E-CCIS Speech Channel Sub Address: 9802
RT20 TK2 E-CCIS Speech Channel Sub Address: 9801
RT20 TK1 E-CCIS Speech Channel Sub Address: 9800
RT10 TK19 ISDN B-channel
RT10 TK18 ISDN B-channel
RT10 TK17 ISDN B-channel
RT10 TK16 ISDN B-channel
RT10 TK2 ISDN B-channel
RT10 TK1 ISDN B-channel
..
...
.
..
...
.
..
...
.
..
...
.