NEC NEAX 2400 IPX, Programming Manual

Page: 183 / 316

NDA-24305 CHAPTER 6
Page 165
Revision 1.0
SUPPLEMENTARY SERVICE
3. PRI STATION (H0)
STEP 1: Assign the numbering (LCR) data to access to H0 terminal.
STEP 2: ARTD - Assign the same route data as the data for Chapter 3 , and arrange the following specific data
to Bch and Dch route.
CDN64 (NET)=
1
CDN65 (INT)= 5 (AT&T)/7 (NT)
CDN66 (DC)= 15
CDN118(BOB)= 1
STEP 3: ATRK - Assign the trunk data for Bch. Note that the data setting for Dch is performed after STEP
6: ACIC1 command assignment. (Refer to
Chapter 3 .)
STEP 4: ADPC - Assign PC (Point Code) to Bch route and Dch route. (Refer to the following example)
RT=15 (Bch) PC=11
RT=16 (Dch) PC=11
H0
23B+D
Bch:RT15
Dch:RT16
PRT