![background image](http://html.mh-extra.com/html/nec/ncs/ncs_quick-reference-user-manual_248467003.webp)
Turn Off Your Telephone’s Mic So Your Caller Can’t Hear Your Voice. . .
1. While on a call, press
MUTE
.
The caller will not hear your voice and the
MUTE
key will light to show that the feature is activated.
To deactivate, press
MUTE
again.
Redial Your Last Number . . .
1. Lift the handset.
2. Press REDIAL.
The last number dialed called.
Speed Dial Keys . . .
The NCS Feature Phone has 20 one-touch speed dial bins that are used for dialing fre-
quently used numbers. Each speed dial bin can store up to 15 digits. There are 10 speed
dial keys plus a
MEMORY SHIFT
key which allows access to the 10 additional speed
dial numbers. The
MEMORY SHIFT
key is used to select the “A” or “B” locations for
each speed dial key. The LED indicator shows if the “A” or “B” location is selected.
The “A” locations are reprogrammed for commonly used features. Refer to page 7 for
details on using those keys.
1. With the handset off-hook, verify the status of the
MEMORY SHIFT
key.
For programming the “A” locations, the LED indica-
tor must be off. For “B” locations, the LED must be on.
2. Press
STORE
.
STORE
is located under the index card on the front
panel.
3. Using the telephone’s dial pad, dial the digits to be stored.
The entry should include any numbers required for
line access and any long distance access numbers (9 +
1 + area code). In addition, the
PAUSE
or
FLASH
keys can also be entered as part of the stored number if
needed.
4. Press the key where the speed dial should be stored.
To program additional numbers, repeat steps 1-4.
1. With the telephone on-hook, press
STORE
twice until
“CHECK” is displayed on the LCD.
2. Press the speed dial key which is to be checked.
The programmed entry will be displayed.
3. Exit the verification mode by pressing
STORE
until the
display returns to its normal/idle display.
Verify/Check a Speed
Dial Bin:
Program a Speed Dial
Bin:
To Automatically Redial
the Last Number that
was Manually Dialed:
Disable the Handset
Microphone and/or the
Speakerphone:
NCS Feature Telephone
- 3 -
NCS Feature Telephone
- 6 -