2. BMC Configuration
Express5800/R320d-E4, R320d-M4 Maintenance Guide (VMware 5.5)
177
Chapter 3 Useful Features
Item
Description
Default Value
Access Limitation
Limitation Type
Select the Access Limitation Type.
Allow All
: Access to BMC is not limited.
Allow Address
: Specify the IP Address that is allowed to access BMC.
Deny Address
: Specify the IP Address that deny to access BMC.
Allow All
IP Address
Specify the IP Address to allow or deny to access with BMC.
*6
*7
Blank
Service
HTTP
Enable or disable HTTP service.
*8
Enable
HTTP Port Number
Specify the HTTP port number.
*9
80
HTTPS
Enable or disable HTTPS service.
*8
Enable
HTTPS Port Number
Specify the HTTPS port number.
*9
443
SSH
Enable or disable SSH service.
Enable
SSH Port Number
Specify the SSH port number.
*9
22
*1:
If an illegal value is specified for subnet mask, an error message is displayed and setting is disabled.
*2:
Can be changed only when DHCP is set to "Disable".
*3:
Can be changed only when DHCP is set to "Enable".
*4:
Host Name should be within 63 characters.
Acceptable characters are: alphanumeric, hyphen (-), underscore (_), and period (.).
*5:
Host Name and Domain Name should be within total of 255 characters.
Acceptable characters are: alphanumeric, hyphen (-), underscore (_), and period (.).
*6:
The range of IP address to "Allow" or "Deny" access is delimited by ",(Comma)". With regard to the setting of
“Deny” access, "*(Asterisk)" can be described as a wild-card. (ex: 192.168.1.*,192.168.2.1,192.168.2.254)
*7:
Can be specified when Access Limitation Type is "Allowed Address" or "Deny Address". The length must not
exceed 255 characters.
*8:
If HTTP is set to "Enable", HTTPS is changed to "Enable" automatically. You are not allowed to set "Enable" to
HTTP only.
*9:
Port number can be specified only when the relevant port is set to "Enable". The port number must be unique.
