manualshive.com logo in svg

NEC N8406-023, Command Reference Manual

The NEC N8406-023 Command Reference Manual is your ultimate guide to maximizing the potential of your NEC N8406-023 device. This comprehensive manual provides step-by-step instructions and essential information to easily navigate and operate your device. Download this essential manual for free from manualshive.com and unlock the full potential of your NEC N8406-023 device.

Share
Download
background image

 

N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (ISCLI)  80  

 
 

Table 73  SNMP statistics 

Statistics 

Description 

snmpInTooBigs 

The total number of SNMP Protocol Data Units (PDUs) that were delivered to 
the SNMP protocol entity and for which the value of the error-status field is too 
big. 

snmpInNoSuchNames 

The total number of SNMP Protocol Data Units (PDUs) that were delivered to 
the SNMP protocol entity and for which the value of the error-status field is 
noSuchName. 

snmpInBadValues 

The total number of SNMP Protocol Data Units (PDUs) that were delivered to 
the SNMP protocol entity and for which the value of the error-status field is 
badValue. 

snmpInReadOnlys 

The total number of valid SNMP Protocol Data Units (PDUs), which were 
delivered to the SNMP protocol entity and for which the value of the error-status 
field is read-only.  
It should be noted that it is a protocol error to generate an SNMP PDU, which 
contains the value read-only in the error-status field. As such, this object is 
provided as a means of detecting incorrect implementations of the SNMP. 

snmpInGenErrs 

The total number of SNMP Protocol Data Units (PDUs), which were delivered to 
the SNMP protocol entity and for which the value of the error-status field is 
genErr. 

snmpInTotalReqVars 

The total number of MIB objects which have been retrieved successfully by the 
SNMP protocol entity as a result of receiving valid SNMP Get-Request and Get-
Next Protocol Data Units (PDUs). 

snmpInTotalSetVars 

The total number of MIB objects, which have been altered successfully by the 
SNMP protocol entity as a result of receiving valid SNMP Set-Request Protocol 
Data Units (PDUs). 

snmpInGetRequests 

The total number of SNMP Get-Request Protocol Data Units (PDUs), which 
have been accepted and processed by the SNMP protocol entity. 

snmpInGetNexts 

The total number of SNMP Get-Next Protocol Data Units (PDUs), which have 
been accepted and processed by the SNMP protocol entity. 

snmpInSetRequests 

The total number of SNMP Set-Request Protocol Data Units (PDUs), which have 
been accepted and processed by the SNMP protocol entity. 

snmpInGetResponses 

The total number of SNMP Get-Response Protocol Data Units (PDUs), which 
have been accepted and processed by the SNMP protocol entity. 

snmpInTraps 

The total number of SNMP Trap Protocol Data Units (PDUs), which have been 
accepted and processed by the SNMP protocol entity. 

snmpOutTooBigs 

The total number of SNMP Protocol Data Units (PDUs), which were generated 
by the SNMP protocol entity and for which the value of the error-status field is 
too big. 

snmpOutNoSuchNames 

The total number of SNMP Protocol Data Units (PDUs), which were generated 
by the SNMP protocol entity and for which the value of the error-status is 
noSuchName. 

snmpOutBadValues 

The total number of SNMP Protocol Data Units (PDUs), which were generated 
by the SNMP protocol entity and for which the value of the error-status field is 
badValue. 

snmpOutReadOnlys 

Not in use. 

snmpOutGenErrs 

The total number of SNMP Protocol Data Units (PDUs), which were generated 
by the SNMP protocol entity and for which the value of the error-status field is 
genErr. 

snmpOutGetRequests 

The total number of SNMP Get-Request Protocol Data Units (PDUs), which 
have been generated by the SNMP protocol entity. 

snmpOutGetNexts 

The total number of SNMP Get-Next Protocol Data Units (PDUs), which have 
been generated by the SNMP protocol entity. 

snmpOutSetRequests 

The total number of SNMP Set-Request Protocol Data Units (PDUs), which have 
been generated by the SNMP protocol entity. 

snmpOutGetResponses 

The total number of SNMP Get-Response Protocol Data Units (PDUs), which 
have been generated by the SNMP protocol entity. 

snmpOutTraps 

The total number of SNMP Trap Protocol Data Units (PDUs), which have been 
generated by the SNMP protocol entity. 

Summary of Contents for N8406-023





























































































































































Reviews:

No comments

Related manuals for N8406-023

Talkswitch switch Start Manual preview
switch
Brand: Talkswitch Pages: 17
Dahua D-PFS4226-24ET-240 Web Operation Manual preview
D-PFS4226-24ET-240
Brand: Dahua Pages: 58
Gavita RS1 User Manual preview
RS1
Brand: Gavita Pages: 12
NTI SE-15V-16-L Installation And Operation Manual preview
SE-15V-16-L
Brand: NTI Pages: 15
TeleAdapt MediaHub Mini TA-3350 Installation Manual preview
MediaHub Mini TA-3350
Brand: TeleAdapt Pages: 23
Labgear HDS3K User Manual preview
HDS3K
Brand: Labgear Pages: 8
A10 Thunder series 930 Installation Manual preview
Thunder series 930
Brand: A10 Pages: 44
Raritan TMCAT17 series Quick Setup Manual preview
TMCAT17 series
Brand: Raritan Pages: 7
I-Tech AVS801 User Manual preview
AVS801
Brand: I-Tech Pages: 22
ATEN 4719264645624 User Manual preview
4719264645624
Brand: ATEN Pages: 261
Nxg VCH8 Owner'S Manual preview
VCH8
Brand: Nxg Pages: 2
GORMAN-RUPP PUMPS EPS 2000 Operation Manual preview
EPS 2000
Brand: GORMAN-RUPP PUMPS Pages: 4
Accton Technology 24/48 10/100 Ports + 2GE Management Manual preview
24/48 10/100 Ports + 2GE
Brand: Accton Technology Pages: 512
Shinybow USA SB-5688CAP Instruction Manual preview
SB-5688CAP
Brand: Shinybow USA Pages: 32
S&T kontron KSwitch D1 UGP User Manual preview
kontron KSwitch D1 UGP
Brand: S&T Pages: 39
3Com 3C16470 User Manual preview
3C16470
Brand: 3Com Pages: 8
3Com 3C16751 User Manual preview
3C16751
Brand: 3Com Pages: 8
Eaton Ulusoy URING36 F-SF6 User Manual preview
Ulusoy URING36 F-SF6
Brand: Eaton Pages: 14

Brands by name

Popular brands

Load more brands