NEC N8406-023 Command Reference Manual Download Page 66 | Manualshive

Page: 66 / 156

background image

N8406-023 1Gb Intelligent L3 Switch Command Reference Guide (ISCLI) 66

IP statistics

The following command displays IP statistics:

show ip counters

Command mode:

All except User EXEC

IP statistics:
ipInReceives: 36475 ipInHdrErrors: 0
ipInAddrErrors: 905
ipInUnknownProtos: 0 ipInDiscards: 0
ipInDelivers: 4103 ipOutRequests: 30974
ipOutDiscards: 0
ipDefaultTTL: 255

The following table describes the IP statistics:

Table 55 IP statistics

Statistics

Description

ipInReceives

The total number of input datagrams received from interfaces, including those
received in error.

ipInHdrErrors

The number of input datagrams discarded due to errors in their IP headers, including
bad checksums, version number mismatch, other format errors, time-to-live exceeded,
errors discovered in processing their IP options, and so on.

ipInAddrErrors

The number of input datagrams discarded because the IP address in their IP header
destination field was not a valid address to be received at this switch. This count
includes invalid addresses (for example, 0.0.0.0) and addresses of unsupported
classes (for example, Class E).
For entities which are not IP gateways and therefore do not forward datagrams, this
counter includes datagrams discarded because the destination address was not a
local address.

ipInUnknownProtos

The number of locally addressed datagrams received successfully but discarded
because of an unknown or unsupported protocol.

ipInDiscards

The number of input IP datagrams for which no problems were encountered to
prevent their continued processing, but which were discarded (for example, for lack of
buffer space).
This counter does not include any datagrams discarded while awaiting re-assembly.

ipInDelivers

The total number of input datagrams successfully delivered to IP user-protocols
(including ICMP).

ipOutRequests

The total number of IP datagrams that local IP user-protocols (including ICMP)
supplied to IP in requests for transmission.
This counter does not include any datagrams counted in ipForwDatagrams.

ipOutDiscards

The number of output IP datagrams for which no problem was encountered to prevent
their transmission to their destination, but which were discarded (for example, for lack
of buffer space).
This counter would include datagrams counted in ipForwDatagrams if any such
packets met this (discretionary) discard criterion.

ipDefaultTTL

The default value inserted into the Time-To-Live (TTL) field of the IP header of
datagrams originated at this switch, whenever a TTL value is not supplied by the
transport layer protocol.

«
...
64
65
66
67
68
...
»

Summary of Contents for N8406-023





























































































































































Reviews:

No comments

Related manuals for N8406-023

Brand: GAIM Pages: 2

IPS7110-2GC-8POE

Brand: 3One data Pages: 3

Brand: Kathrein Pages: 8

Brand: Nayar Systems Pages: 21

Brand: Kathrein Pages: 24

Brand: Kasia Pages: 5

Brand: Hansen Pages: 4

Brand: Server Technology Pages: 12

Brand: Erbe Pages: 118

Brand: N-Tron Pages: 132

Brand: Imtex-Controls Pages: 2

Brand: Accton Technology Pages: 10

Brand: Lancom Pages: 23

CRSMEO-4 Series

Brand: Festo Pages: 16

SICOM3432G Series

Brand: KYLAND Pages: 29

Brand: enbrighten Pages: 2

Brand: SICK Pages: 299

kontron KSwitch D1 UGPD

Brand: S&T Pages: 40

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands