58
Connecting Interface Cables
Connect the motherboard to the Built-in DVD-RAM drive and the CD-ROM/RW drive by
using the IDE interface cable within the computer or that coming with the Built-in DVD-RAM
drive.
CAUTION
Do not use any damaged cable.
Before the connection of a cable, make sure that the connectors of the cable are not
damaged and no connector pins are bent and dirt. Using a cable with a damaged
connector or some bent or dirt pins may cause a fire due to a short circuit.
Use the IDE interface cable included in the computer if the cable has a two-way
connector. Note the connection order.
Connect the IDE interface cable to the Built-in DVD-RAM drive, the factory installed CD-
ROM/RW drive, and the IDE connector on the motherboard. Save any cables becoming
unnecessary carefully.
Connect the interface cable coming from the mating connector on the motherboard to the
Built-in DVD-RAM drive and the CD-ROM/RW drive in the order.
The IDE interface cable coming with the Built-in DVD-RAM drive must be connected to
the adjacent CD-ROM/RW drive factory installed because the MASTER-to-SLAVE
cable only has a rather short length.
Motherboard
CD-ROM/RW drive
Built-in DVD-RAM drive
Attached cable
IDE connector
←
MASTER
←
SLAVE
Summary of Contents for N8151-32B
Page 22: ...14 ...
Page 32: ...24 3 ディスクをトレーにのせる 4 イジェクトボタンを押してトレーを閉じる データ面をトレーに向け レーベルな どの印刷面を上に向ける ホルダーに引っかける ...
Page 63: ...55 ...
