61
Checking by BIOS
Confirm that the Built-in DVD-RAM drive and the CD-ROM/RW drive subject to connection
change are installed properly by using the BIOS Utility in the computer. (Some computers
cannot use the BIOS Utility for the confirmation. If so, make the confirmation on OS.) Refer
to the manual of the computer for how to start and operate the BIOS Utility.
After the BIOS Utility is started, the screen shown below appears. The Main menu on the
screen includes the types of devices connected to the computer.
If the screen display does not include the Built-in DVD-RAM drive and the CD-ROM/RW
drive, either of the following problems is suspected. (For the Built-in DVD-RAM drive, the
screen display should indicate the IDE bus to which the Built-in DVD-RAM drive is
connected and "CD-ROM" in the ID field assigned to the Built-in DVD-RAM drive.)
The interface and/or power cables are connected incorrectly.
→
Connect the cables correctly.
One or more device IDs are set incorrectly.
→
Set any ID to be unique.
<Sample display>
Installing Device Driver
Some operating systems installed in the computer require the device driver to be installed.
Install the device driver to the computer by using the "Device Driver Disk" coming with the
Built-in DVD-RAM drive.
For the conditions required for the installation and the installation procedure, refer to the
"Built-in DVD-RAM Driver Software User’s Guide" coming with the Built-in DVD-RAM drive.
Summary of Contents for N8151-32B
Page 22: ...14 ...
Page 32: ...24 3 ディスクをトレーにのせる 4 イジェクトボタンを押してトレーを閉じる データ面をトレーに向け レーベルな どの印刷面を上に向ける ホルダーに引っかける ...
Page 63: ...55 ...
