NEC N8151-32B, User Manual

Page: 57 / 92

49
Part Name and Function
The following describes the names of the parts used to install or handle the Built-in DVD-
RAM drive and their locations.
<Front View>
1 Tray
Place on which a disk is put
The tray is moved if you press the eject button or push the tray under the power-on status.
(The tray does not move under the power-off status.)
2 Eject button
Press this button to insert or eject a disk into or from the Built-in DVD-RAM drive. (The button
does not operate if the power of the Built-in DVD-RAM drive is OFF or the relevant program
prohibits it from operating.)
3 Manual emergency ejecting hole
Insert a pin (such as a clip extended straight) into this hole to eject the tray manually. (The
hole is provided to eject the tray manually when the eject button and the relevant software are
not available for the ejection.)
4 Busy indicator
The indicator operates as shown in the table below under the power-on status.
Inserted media Operation status Indication
Writing Blinking green
Reading Off
DVD-RAM disk
Stand-by Off
Reading Illuminating green CD-ROM or similar disk
Stand-by Off
Reading Illuminating green CD/DA or similar disk
Stand-by Off
No disk insertion — Off
Disk inserting/ejecting — Blinking green
1
4
3
2