138
60.
On the right of the screen, items required for reconstruction are displayed.
61.
Select "Migration with addition".
62.
Specify the RAID level used after reconstruction.
63.
Select a HDD to be added.
64.
When you finished steps 5 to 7, click [Go] at the lower right of the screen.
65.
The progress of reconstruction is displayed on the lower left of the screen. Click
[Home] at the lower left of the screen to return to the WebBIOS top menu.
Notice
The capacity of virtual disk may be incorrectly displayed after
reconstruction. In this case, perform Scan Devices from the top menu.
Click [Home] while the background task such as Consistency Check,
Rebuild, or reconstruction is being executed. With the progress
indication being displayed, the background task may be processed at
slow rate on some servers.
Information of HDDs in the disk
group in which a VD is defined.
Migration Only:
Check here when changing RAID
level only.
Migration with addition:
Check here when adding HDD
and change RAID level.
Summary of Contents for N8103-91
