1. Installing Internal Optional Devices
Express5800/T120e User’s Guide
74
Chapter 2 Preparations
Memory Mirroring feature can be used under the following conditions:
Install DIMMs in two DIMM sockets configuring a mirror set.
Refer
to
Chapter 2 (1. System BIOS)
in
"Maintenance Guide"
, check if your server supports Memory
Mirroring feature.
Select
Advanced
Memory Configuration
Memory Information
, and check if
Supported
is
displayed in
Mirroring
.
Refer
to
Chapter 2 (1. System BIOS Setup)
in “
Maintenance Guide”
, change parameters as shown below,
save the settings and exit from SETUP.
Advanced
Memory Configuration
Memory RAS Mode
: Change to
Mirroring
.
After restart, run SETUP again, and check if "
Mirrored
" is displayed for the following parameter.
Advanced
Memory Configuration
Memory Information
CPUx_DIMMx Status
Installation order depends on CPU configuration. See the figure below.
Memory Mirroring cannot be configured in the following case:
Memory Mirroring within a specific memory channel
Notes on Configuring Memory Mirroring
When you additionally install or remove DIMMs that unable to configure Memory Mirroring configuration,
Memory RAS Mode is changed to "Independent".
"Mirrored" is removed from
Advanced
Memory Configuration
Memory Information
CPUx_DIMMx
Status xxxx MB (Mirrored)
in BIOS SETUP.
REAR
FRONT
1-CPU
configuration
(Empty)
(Empty)
1st set
2nd set
1st set
2nd set
2-CPU
configuration
(Empty)
(Empty)
1st set
3rd set
1st set
3rd set
4th set
2nd set
4th set
2nd set
(Empty)
(Empty)