NEC N8100-2089F User Manual Download Page 120

Page: 120 / 173

1. Installing Internal Optional Devices

Express5800/T120e User’s Guide

120

Chapter 2 Preparations

1.18

Use of Internal hard disk drives in the RAID System

This section describes how to use the hard disk drives installed in the HDD cage at the front of the server in the
RAID System.

Important



If you use hard disk drives in the RAID System or change the RAID level,

initialize the hard disk drives. If the hard disk drive contains valuable data,

be sure to backup the hard disk drive before installing the RAID Controller

and configuring the RAID System.



If both PCI #1 and PCI #2 slots contain RAID controller, OS is installed in

hard disk drive connected to RAID Controller in PCI #2 slot. Use the hard

disk drive connected with RAID controller in PCI slot #1 for storing data.

Note

In the RAID System, use hard disk drives that have the same specifications

(capacity, rotational speed, and standard) for each Disk Array.

Tips



Logical Drives can be created even with only one Physical Device.



When using SAS hard disk drives, RAID Controllers must be connected.

1.18.1 Connecting cables

(1) 2.5-inch HDD cage

Connect cables to 2.5-inch HDD cage by referring to the illustration below.

[BPB_CON1]
connector

[BPB_CON2]
connector

[MINISAS_1]
connector

[MINISAS_2]
connector

[CN1]
connector

[CN2]
connector

Summary of Contents for N8100-2089F














































































































































































Search results

Summary of Contents for N8100-2089F

Reviews:

NEC N8100-2089F, User Manual, Page: 120 / 173

Search results

Summary of Contents for N8100-2089F

Reviews: