NEC N223I Using Manual Download Page 22 | Manualshive

Page: 22 / 89

background image

9

Changing the battery

Make sure the phone is switched off. Some settings may be lost if the battery is removed while the power is on.

☛

Slide the battery catch towards the base of the phone

➀

and lift the battery out

➁

.

☛

Put the new battery pack in the base first then lower it into place

➂

.

Charging a battery

The charger unit begins to restore the battery power when it is connected to the phone.

☛

Connect the charger plug into the connector at the base of the phone. Check the
charging icon is displayed and the LED is in Colour 9 (Apple).

During charging, screen displays as Fig. 1, the charging icon displays and the LED is in
Colour 9 (Apple) (see Fig. 2). When charging is complete, the charging icon will go out and
the battery icon in full level will be displayed, the LED will go out and trickle charging will
continue. The charging icon will indicate and LED will glow red even when the phone is
switched off during charging.
Switching off the phone is recommended during charging.
If you need to receive calls, your phone can be switched on and left in standby while it is charging, although the total time taken to charge is
then increased.
Your phone is designed to be charged with the NEC equipment listed with the specifications of your phone.

2

If the phone does not respond when you first turn the charger on, please wait for 10 to 20 minutes, the charging will then start.

,

Do not try to charge the battery if the ambient temperature is below 0 °C or above 45 °C

,

Damage may result if you do not press in the charger connector’s side catches when removing it from your phone.

2

If you use the phone during charging, handle the phone carefully since the cable or adapter is connected.

3

2

2

1

Charging
icon

,

Using any battery pack, AC
adapter or Cigar Lighter adapter
(option) not specified by NEC for
use with this phone can be
dangerous and may invalidate any
warranty and approval given to
your phone. Do not connect more
than one charger at any time. Do
not leave the charger connected
to the mains supply when it is not
in use.

Fig. 1

LED

Charger connector

Fig. 2

«
...
20
21
22
23
24
...
»

Summary of Contents for N223I


























































































Reviews:

No comments

Related manuals for N223I

Brand: Pantech Pages: 97

Brand: Pantech Pages: 52

Brand: Pantech Pages: 2

Brand: Samsung Pages: 204

Brand: T-Mobile Pages: 2

Brand: Figo Pages: 10

Brand: OneTouch Pages: 40

Brand: SoftBank Pages: 2

SPH-A580 Series

Brand: Samsung Pages: 156

Brand: Samsung Pages: 156

Brand: Samsung Pages: 153

Brand: Samsung Pages: 156

Brand: Samsung Pages: 72

Brand: AU Pages: 55

Brand: Myria Pages: 76

Brand: Sigma Pages: 61

Brand: NEC Pages: 74

Brand: Nokia Pages: 63

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands