background image

English-7

English

Attaching Mounting Accessories

The monitor is designed for use with the VESA mounting 
system.

1. Attach Mounting Accessories

Be careful to avoid tipping the monitor when attaching 
accessories.

VESA Mounting Interface (M6)

300 mm

300 mm

Mounting accessories can be attached with the monitor in 
the face down position. To avoid scratching the LCD panel, 
always place a soft cloth, such as a blanket that is larger 
than the monitor’s screen area, on the table before laying the 
monitor face down. Make sure there is nothing on the table 
that can damage the monitor.

When using mounting accessories other than NEC compliant 
and approved, they must comply with the VESA Flat Display 
Mounting Interface Standard (FDMI).

NOTE:

 

Prior to installation, be sure to place the monitor 
on a flat area with adequate space.

2. Using an Option Board

1. Turn off the main power switch.

2. Place the monitor face down on the soft cloth.

NOTE: Be sure to place the monitor on a flat and adequate 
space.

3. Remove the attached slot cover by unscrewing the 

installed screws (

Figure 1

).

Figure 1

4. Insert the option board into the monitor and fix it with the 

removed screws (

Figure 2

).

NOTE:

 

Please contact your supplier for available option 
boards.
Do not apply excessive force to manipulate the 
option board before fixing it with screws.
Make sure that the board is inserted into the slot in 
the correct orientation.

 CAUTION:

   Ensure the option board is attached by the 

removed screws. As falling the option board 
may expose you to danger.

(Recommended฀Fasten฀Force:฀139฀-฀189N•cm).

Figure 2

3. Using Wall Mount Adapter

If the mounting accessory interferes with ventilation hole, use 
the included wall mount adaptors (Dia. 14 mm) and screws. 
If the adaptor screws are too long, include a washer to 
reduce the depth. Washer not included.

Wall mount 
adapter screw

Washer

Mounting bracket

Unit

Wall mount adapter (Dia. 14 mm)

10-12 mm

18 mm

Pictured mounting solutions may not be available in some 
countries.

Summary of Contents for MultiSync V554












































































Reviews: