background image

English-13

English

Operating Range for the Remote 
Control

Point the top of the remote control toward the LCD monitor’s 
remote control sensor during button operation.

Use the remote control within a distance of about 7 m (23 ft.) 
from the remote control sensor, or at a horizontal and vertical 

angle฀of฀within฀30°฀and฀within฀a฀distance฀of฀about฀3.5฀m฀(10฀ft.).

T

 STILL Button

ON/OFF Button:

 Activates/deactivates still picture mode.

CAPTURE Button:

 Captures still picture.

NOTE:

 This function deactivates when selecting MULTI 

PICTURE MODE, TEXT TICKER, SCREEN SAVER, POINT 
ZOOM, IMAGE FLIP except for NONE, SUPER in INPUT 
CHANGE, TILE MATRIX. 
CLOSED CAPTION is not available when STILL is active.
If input signal is OPTION, this button’s actions depend on 
which option board you are using.

 IMAGE FLIP Button

Toggle฀switches฀between฀[H฀FLIP],฀[V฀FLIP],฀[180°฀ROTATE]฀

and [NONE]. See page 34.

 ACTIVE PICTURE Button

Selects active picture.

 MULTI PICTURE Button

ON/OFF Button:

 Toggle switches between ON and OFF.

MODE Button:

 Selects a mode from PIP (picture in picture) 

or PBP (picture by picture).

CHANGE Button:

 Swaps images between two pictures.

PICTURE ASPECT Button:

 Selects active picture frame 

aspect. 

NOTE:

 Enable to change each multi picture size by pressing 

SET/POINT ZOOM button during multi picture mode.

 REMOTE ID Button

Activates the REMOTE ID function. See page 46.

See page 46.

 MTS Button*

1

 

 Button*

1

Activates closed captioning. 

NOTE:

 VIDEO input only.

*1: This button’s action depends on which option board you are using. 
 

Refer to the option board’s user’s manual for further information. 

NOTE:

 

The buttons with no explanation do not function.

Caution: 

Important, the remote control 

system may not function when 
direct sunlight or strong 
illumination strikes the 
remote control sensor, or 
when there is an object in 
the path.

Handling the remote control

•฀ Do฀not฀expose฀to฀strong฀shock.
•฀ Do฀not฀allow฀water฀or฀other฀liquid฀to฀

splash on the remote control. If the 
remote control gets wet, wipe it dry immediately.

•฀ Avoid฀exposure฀to฀heat฀and฀steam.
•฀ Except฀to฀install฀the฀batteries,฀do฀not฀open฀the฀remote฀

control.

Summary of Contents for MultiSync V554












































































Reviews: