NEC MultiSync FP1355 FP1355 FP1355, Service Manual

Page: 156 / 207

/
VSP-C0464
14
5. Display Quality
5.1 Test Conditions
4:3 aspect ratio
Width: 396mm , Height: 297mm
5:4 aspect ratio
Width: 371mm , Height: 297mm
5.2 Display size
5.3 Luminance
Luminance at CRT center
Full White:
≥
100cd/m
2
(at Color No.1)
≥
70 cd/m
2
(TBD) (at sRGB)
≥
70 cd/m
2
(at Color No.5)
•Unless specified, the monitor is set at the factory default setting.
AC Voltage 120VAC 60Hz or 230VAC 50Hz
Video Signal
1600 x 1200 (106kHz at 85Hz Hz) 0.7Vp-p
Warm Up
More than 30 min. with full white picture
Temperature
20 - 25 ˚ C
Relative Humidity
40 - 80%
Magnetic Field BH=0, BV=0.040mT
Contrast & Brightness
Contrast maximum and Brightness center
position (Back Raster: Approx.0.3cd/m2)
Display Size 396 x 297mm for 4:3 aspect ratio
Ambient light
200 ± 50 lx
Luminance Meter
Minolta CA100 or Equivalent
Luminance Variation
∆
Luminance / Center Luminance:
≤
25%
Back Raster Luminance
Approx. 0.3 cd/m
2
at Color No.1,No.5
Approx 0cd/m
2
at sRGB
Raster must not visible at minimum Brightness control
Color Temperature
Color-1: 9300K + 8 M.P.C.D.
Color-2: 8200K (X=0.290,Y=0.313)
Color-5: 5000K + 8 M.P.C.D.
X=0.345 ± 0.015
White Uniformity
≤
0.015: in either the X or Y shift
between the center and peripheral area(Color-1)
Color Tracking
5.4 Color
Contrast Control: ±0.020 from 25cd/m
2
to Maximum
at detent Brightness position(Color-1)
Y=0.359 ± 0.015
Y=0.297 ± 0.015
X=0.283 ± 0.015
Color-3: 7500K (X=0.300,Y=0.315)
sRGB : 6500K (X=0.313,Y=0.329)