![background image](http://html.mh-extra.com/html/nec/multisync-fp1355-fp1355-fp1355/multisync-fp1355-fp1355-fp1355_service-manual_1667336094.webp)
2 - 13
2.4.6
Adjusting the RGB drive signal and X-Pro
2.4.6.1
Adjusting the R, G, B drive signal (Adjustment of COLOR 1)
(1) Input the timing No.12.
WINDOW picture (Input amplitude = 0.7Vp-p)
(2) Select CONTRAST with the OSD, and set to MAX with (+) ADJUST button.
(3) Select BRIGHT with the OSD, and set the data to 127 with the (-) (+) ADJUST buttons.
(4) Set the WINDOW pattern (approx. 80mm square at center of CRT picture), and input only
"GREEN".
(5) Set the COLOR 1 G with the OSD, and adjust the luminance to the following value with the
ADJUST button.
(6) Input BLUE, RED and GREEN, appropriately select the COLOR 1 B and R, and adjust the
color coordination to the following value with the ADJUST button.
(7) Set CONTRAST to 25cd/m
2
with the OSD to confirm that the change in color coordination
is within
±
0.015 for both x and y.
*Adjust COLOR sRGB and 5 to the following values with the same method.
If COLOR sRGB and 5 are contented with the following value, they can be adjusted with
presumptioni respectively.
The values of G-WINDOW luminance are reference.
(Note) After adjusting COLOR, always set to COLOR 1.
(The COLOR preset will be set to the default COLOR 1 with this step.)
2.4.6.2
Adjusting ABL
(1) Set the OSD ABL to 254.
(2) Input the timing No. 12 (106.25kHz/85Hz, 1600x1200).
(Full white picture input amplitude = 0.7Vp-p)
(3) Set contrast to MAX, bright to MAX, and select ABL-ADJUST with OSD. Adjust to 115cd/
m
2
±
5 with COLOR 1.
The picture size must be approximately the H width given in the list of adjustment values at
this time. (Refer to 2.5.1.10 Adjustment value list.)
Adjustment item
R, G, B drive signal
Adjustment mode/set
Factory
Imput signal/pattern
No. 12:106.25K / 85Hz, 1600x1200
WINDOW picture
Status
indicator
Adjustment item
ABL
Adjustment mode/set
Factory
Imput signal/pattern
No. 12:106.25K / 85Hz, 1600x1200
Full white
Status
indicator
1
(76.0)
0.283
0.297
105 or more
x
y
COLOR
G-WINDOW luminance
W-WINDOW
color coordination
Full white luminance (cd/m
2
)
sRGB
(67.0)
0.313
0.329
92 or more
5
(56.0)
0.345
0.359
77 or more
Remarks
(Reference value)
±
0.005
±
0.005
Summary of Contents for MultiSync FP1355 FP1355 FP1355
