![background image](http://html.mh-extra.com/html/nec/multisync-fp1355-fp1355-fp1355/multisync-fp1355-fp1355-fp1355_service-manual_1667336114.webp)
2 - 33
2.8
Default inspection
2.8.1
Default setting of switches
Confirm that the following switch is set as follows.
(1) Power switch: OFF
2.8.2
Default setting of OSD
Confirm that each OSD setting is as shown in the OSD display (section 2.3.3) table (user
mode/factory mode).
If the setting class is an item for each timing, carry out for each adjustment timing.
*
CENTER is the factory adjustment value called when RESET button is pressed in the
normal mode.
Only CONTRAST will be set to MAX 100% when RESET button is pressed in the normal
mode.
NOTE) BRIGHTNESS CENTER is as follows.
for North America
: Adjustment bar is at center (50%).
for Europe
: Adjustment bar is at one third (approx. 30%).
2.8.3
Checking the labels
Confirm that the "SERVICEMAN WARNING", "rating label", "manufacturing date stamp", "SE-
RIAL NO. label", and "set sub-No.", etc., are attached to the specified position, and have been
checked.
2.8.4
Packaging
(1) There must be no remarkable contamination, tearing or scratches, etc.
(2) The model name must be accurately displayed.
(3) The SERIAL NO. must be attached. (Must be the same No. as the set.)
(4) The package must be accurately sealed.
2.7
Self-diagnosis shipment setting
The shipment settings for self-diagnosis data area (region) are given below.
ADR
6A
6B
6C
6D
6E
6F
70
71
72
73
74
75
76
77
78
79
7A
7B
7C
7D
A0
A1
A2
A3
A4
A5
Function
Operation horizontal frequency 1 (frequency indicated in the latest period)
Operation vertical frequency 1 (frequency indicated in the latest period)
Operation horizontal frequency 2 (frequency indicated in the secondary latest period)
Operation vertical frequency 2 (frequency indicated in the secondary latest period)
Operation horizontal frequency 3 (frequency indicated in the third latest period)
Operation vertical frequency 3 (frequency indicated in the third latest period)
Short-circuit rate at User mode
X-PRO rate at User mode
Beam Pro rate at User mode
I2C error rate at User mode
High voltage fail safe operation rate at User mode
High voltage, X-PRO data EEPROM reading error rate at User mode
Short-circuit rate at Factory mode
X-PRO rate at Factory mode
Beam Pro rate at Factory mode
I2C error rate at Factory mode
High voltage fail safe operation rate at Factory mode
High voltage, X-PRO data EEPROM reading error rate at Factory mode
Lower byte of operating time (including POWER SAVE)
Upper byte of operating time (including POWER SAVE)
Heater ON time 00 - 03 (15 min. unit) (excluding POWER SAVE)
Heater ON time 00 - 03 (15 min. unit) (excluding POWER SAVE)
Lower byte of Heater ON time (1 Hr. unit) (excluding POWER SAVE)
Upper byte of Heater ON time (1 Hr. unit) (excluding POWER SAVE)
Default Setting (H)
00
00
00
00
00
00
00
00
00
00
00
00
Summary of Contents for MultiSync FP1355 FP1355 FP1355
