background image

English

English-14

Limited Warranty

  NEC Display Solutions of America, Inc. (hereinafter “NEC DISPLAY SOLUTIONS”) warrants this Product 

to be free from defects in material and workmanship and, subject to the conditions set forth below, 
agrees to repair or replace (at NEC DISPLAY SOLUTIONS_ sole option) any part of the enclosed unit 
which proves defective for a period of three (3) years from the date of fi rst consumer purchase. Spare 
parts are warranted for ninety (90) days. Replacement parts or unit may be new or refurbished and 
will meet specifi cations of the original parts or unit. This warranty gives you specifi c legal rights and 
you may also have other rights, which vary from state to state. This warranty is limited to the original 
purchaser of the Product and is not transferable.

  This warranty covers only NEC DISPLAY SOLUTIONS-supplied components. Service required as a 

result of third party components is not covered under this warranty. In order to be covered under this 
warranty, the Product must have been purchased in the U.S.A. or Canada by the original purchaser. 
This warranty only covers Product distribution in the U.S.A. or Canada by NEC DISPLAY SOLUTIONS. 
No warranty service is provided outside of the U.S.A. or Canada. Proof of Purchase will be required 
by NEC DISPLAY SOLUTIONS to substantiate date of purchase. Such proof of purchase must be an 
original bill of sale or receipt containing name and address of seller, purchaser, and the serial number of 
the product.

  It shall be your obligation and expense to have the Product shipped, freight prepaid, or delivered to 

the authorized reseller from whom it was purchased or other facility authorized by NEC DISPLAY 
SOLUTIONS to render the services provided hereunder in either the original package or a similar 
package affording an equal degree of protection. All Products returned to NEC DISPLAY SOLUTIONS 
for service MUST have prior approval, which may be obtained by calling 1-800-632-4662. The Product 
shall not have been previously altered, repaired, or serviced by anyone other than a service facility 
authorized by NEC DISPLAY SOLUTIONS to render such service, the serial number of the product shall 
not have been altered or removed. In order to be covered by this warranty the Product shall not have 
been subjected to displaying of fi xed images for long periods of time resulting in image persistence 
(afterimage effects), accident, misuse or abuse or operated contrary to the instructions contained in the 
User’s Manual. Any such conditions will void this warranty.

  NEC DISPLAY SOLUTIONS SHALL NOT BE LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, 

CONSEQUENTIAL, OR OTHER TYPES OF DAMAGES RESULTING FROM THE USE OF ANY NEC 
DISPLAY SOLUTIONS PRODUCT OTHER THAN THE LIABILITY STATED ABOVE. THESE WARRANTIES 
ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED 
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE. SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES OR THE 
LIMITATION OR EXCLUSION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES SO 
THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU.

  This Product is warranted in accordance with the terms of this limited warranty. Consumers are 

cautioned that Product performance is affected by system confi guration, software, the application, 
customer data, and operator control of the system, among other factors. While NEC DISPLAY 
SOLUTIONS Products are considered to be compatible with many systems, specifi c functional 
implementation by the customers of the Product may vary. Therefore, suitability of a Product for 
a specifi c purpose or application must be determined by consumer and is not warranted by NEC 
DISPLAYSOLUTIONS.

  For the name of your nearest authorized NEC Display Solutions of America, Inc. service facility, contact 

NEC Display Solutions of America, Inc. at 1-800-632-4662.

Summary of Contents for MPD-DTi
















Reviews: