NEC MPD-DTi, User Manual, Page: 10 / 15

English-9
IP Program Settings
1. On the “Tuner” menu page, press
button to select “IP
Program Settings” and press the “SET” button.
2. Select “Add” and press the “SET” button, then there are two
sub-menus listed.
(1) Unicast
Press button to select “Unicast” and press the “SET”
button, you will see the “Channel No” and “Port” to be
typed. Then press button to select “Add” and press
the “SET” button to apply.
(2) Multicast
Press button to select “Multicast” and press the “SET”
button, you will see the “Channel No”, “IP Address” and
“Port” to be typed. Then press button to select “Add”
and press the “SET” button to apply.
3. Select “Delete” on the step 2 above, and press the “SET”
button, you can type the “Channel No.” to delete the IP
channel program.
Channel Edit
This feature allows you to select which channels in memory
are tuned when using the “CH +” or “CH-“ buttons.
1. On the “Tuner” menu page, press
button to select
“Channel Edit” and press “SET” to display the list of
memorized channels. Press the “SET” button again to edit
the channel list.
2. Use
button to select each channel in the list. Pressing
the “SET” button on a checked channel will remove it
from the list (skip), while pressing the “SET” button on an
unchecked channel will add it to memory.
Menu Language
This function selects OSD menu Language.
1. On the “Confi guration” menu page, press
button to
select “Menu Language” and press the “SET” button.
2. Press
to select the OSD Menu Language and press the
“SET” button.
Time Zone
This function selects the Time Zone and D.S.T. (Daylight
Saving Time) settings.
1. On the “Confi guration” menu page, press
button to
select “Time Zone” and press the “SET” button.
2. Press
to highlight “Time Zone” and press “SET” button.
3. Press
to select the “Time Zone” and press “SET” button.
4. Press
to highlight “D.S.T.” and press “SET” button.
5. Press
to select the “D.S.T.” and press “SET” button.