background image

English-2

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT 
USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE 
PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING 
TO QUALIFIED SERVICE PERSONNEL.

WARNING

TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO 
FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. 
DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.

CAUTION

Power Cord Important Information

CAUTION: Please use the power cord provided with this monitor in accordance with the table below. If a power cord is not 
supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the 
AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.
When you use this monitor in North America, you should use a North America Hospital Grade power cord.

Plug Type

North  America

European 

Continental

U.K.

Chinese

Japanese

Plug Shape

Country

Voltage

U.S.A./Canada

U.K.

China

Japan

EU (except U.K.)

120

230

220

100

230

(green dot 
and tag label)

NOTE: 

This product can only be serviced in the country where it was purchased.

MD211G3 paper manual.indb   2

MD211G3 paper manual.indb   2

3/27/12   11:18:30 AM

3/27/12   11:18:30 AM

Summary of Contents for MD211G3



















Reviews: