NEC MA4000, User Manual

Page: 58 / 74

4-24 Setting Up Infrastructures
MA4000 Expense Management Cable Management User Guide - Issue 1
Adding a Conductor
You can add a conductor after adding appropriate busbars for the
highlighted space.
Step 1
At the top of the List View, click the Conductors radio button.
Step 2
Click the Add button in the List View.
Step 3
In the Conductor Info tab, enter the Conductor ID .
Step 4
Select the type from the Conductor Type drop-down list.
Step 5
In the Source box, Building, Floor, and Space are populated with your
location on the Navigator Tree. Click the yellow ellipsis button next to the
Busbar ID field.
Step 6
From the Select Item window, select a busbar located in that space.
Step 7
Click Accept .
Step 8
In the Destination box, click the Set Location button.
Step 9
In the Location window, select the destination location.
Step 10
Click Accept . Building, Floor, and Space are populated.
Step 11
Select the type from the Dest. Type drop-down list.
Step 12
Complete the appropriate fields depending on which destination type you
selected:
— Asset - Asset ID, Type, and Name fields appear in the Destination
box. Click the button next to the Asset ID field. When the Select Item
window appears, select the Asset ID and click OK . The Type and
Name fields are automatically populated.
— Backbone - Backbone ID and Type fields appear. Click the button
next to the Backbone ID field. When the Select Item window appears,
select the Backbone ID and click OK . The Backbone ID and Type
fields are populated.
— Busbar -Busbar ID and Type fields appear. Click the button next to the
Busbar ID field. When the Select Item window appears, select the
Busbar ID and click OK . Busbar ID and Type fields are automatically
filled in.
— Pathway - Pathway ID and Type fields appear. Click the button next to
the Pathway ID field. When the Select Item window appears, select
the Pathway and click OK .
— Term HW - Term HW ID and Type fields appear. Click the button next
to the Term HW ID field. When the Select Item window appears, select
the Term HW ID and click OK . The Type field is automatically filled in.
Step 13
Click Save to save all input information.