NEC MA4000 User Manual Download Page 29

Page: 29 / 74

Cable Management Tools 2-11

MA4000 Expense Management Cable Management User Guide - Issue 1

General Settings

Cable Management's

General Settings

capability is located on the

Cable Management Main Page via the

General Settings

link under the

SETUP

section of the menu.

When the

General Settings

link is selected, the

Hide Sections

pop-up

window appears. This tool is meant for hiding specific areas of the

infrastructure that are not in use. Within the pop-up window, the user

can select the areas to hide by selecting the box and then pressing the

SAVE

button to close the pop-up window. These areas will be hidden

throughout the application and can be reinstated for future use by

following the same process.
The areas that can currently be hidden are listed as follows:
• Pathways
• Firestops
• Grounding
• Splices

The four areas listed above are very important areas of your infrastructure. Using

Cable Management to document these areas is recommended, but hiding these

areas and not using them is up to the user's discretion. Most importantly, these

sections can be hidden and reinstated at any time depending on user preference.

NOTE

Summary of Contents for MA4000











































































Search results

Summary of Contents for MA4000

Reviews:

Related manuals for MA4000

Brands by name

Popular brands

NEC MA4000, User Manual

Search results

Summary of Contents for MA4000

Reviews:

Related manuals for MA4000

Brands by name

Popular brands