NEC LS2400, User Manual, Page: 165 / 186

Emergency Management Port C-15
!
Window - gives options for displaying currently open windows.
!
Help - provides version information for the SEL viewer and provides
help topics on the EMP.
Sensor Type Codes
The Sensor Type Code Table provides information regarding:
!
The type of sensor generating the SEL entry
!
The name of the sensor
!
The microcontroller which initiated the SEL entry
!
The warning or error which initiated the SEL entry.
Using the Sensor Type Code Table
Compare the Sensor Type and Number message shown in the SEL
viewer display (above) to the Sensor Type/Number in Verbose
column in the table below. Using information in the Sensor Name
column in the table you can determine the physical component
which generated the SEL message. The Generator ID column in
the table identifies the microcontroller that reported the event to
the SEL. Detailed information regarding the event is available
from the Event Description column in the SEL Viewer.
For example, if there is a Fan #10 entry in the Sensor Type and
Number column of the SEL Viewer, by looking at the Sensor type
Codes table you can determine that the Baseboard Fan 1 caused
this entry. The entry was reported through the Baseboard
Management Controller (BMC) on the system board.
Sensor Type Codes
Sensor Type and Number in
Verbose Sensor Name Generator ID
Reserved 00h BMC
Temperature #17 Processor1 Temp BMC
Temperature #18 Processor2 Temp* BMC
Temperature #19 Baseboard Temp1 BMC
Temperature #1A Baseboard Temp2 BMC
Voltage # 01 Baseboard 5V BMC
Voltage # 02 Baseboard 3.3V BMC
Voltage # 03 Primary Processor BMC
Voltage # 04 Secondary Processor* BMC
Voltage # 05 Processor 2.5V BMC
*Not applicable to all servers