NEC LS2400, User Manual, Page: 104 / 186

4-32 Upgrading Your System
Removing a 5.25-Inch Device
1.
Power off the system and remove the side panels as described earlier
in this chapter.
2.
Remove the front panel as described earlier in this chapter.
3.
Disconnect the power cable (A) and ribbon data cable (B) from the
device you are removing.
Removing a Removable Media Device
4.
Remove and save the four screws from the device.
5.
Install an EMI (Electromagnetic Interference) shield and filler panel
over the bay from which you removed the peripheral device.
6.
Replace the side panels and front panel, and power on the system.
7. Remove the drive serial number from the equipment log.
A
B