NEC LS2400, User Manual, Page: 100 / 186

4-28 Upgrading Your System
Removing EMI Shields and Filler Panels
1. Power off the system and remove the front panel as described earlier
in this chapter.
2.
Locate the EMI (Electromagnetic Interference) shield and filler panel
covering the bay into which you are installing a peripheral device.
The filler panel is released by pressing on its sides and removing it
from the slots in the EMI shield. Save the panel for reinstallation.
3.
The EMI shield is attached to the front of the chassis be two screws.
Remove the screws and EMI shield covering the bay into which you
are installing a peripheral device. Save the shield and screws for
reinstallation.
EMI Shield and Filler Panels Removal