Appendix
– continued
Warning Signal
Sometimes you probably will see the warning messages from this LCD screen.
This means that the LCD display cannot exactly receive the signal from the
computer graphic card.
There are three kind of situations that may happen. Please check the connected
cables or contact your local dealer for more information.
•
No Signal
This message means that the LCD display has been powered on but it cannot
receive any signal from the computer graphic card. Check all the power
switches, power cables, and VGA signal cable.
•
Going to Sleep
This message means that the LCD display is under the power saving mode. In
addition, the LCD display will go to this sleeping mode when experiencing a
sudden signal disconnecting problem.
•
Out of Range
This message means that the signal of the computer graphic card is not
compatible with the LCD display. When the signal is not included in the
compatibility mode we have listed in the Appendices of this manual, the LCD
will display this message.
13 – User’s Manual
English
Summary of Contents for LCD1511M
