2.
Unplug all wires on inverter board and unscrew the four screws to remove the left and
right holders
(Figure 22)
.
3.
Unscrew the two screws on Inverter Board to remove Inverter Board
(Figure 23)
.
1.
Turn over the LCD Panel set and put it on the safe place with a foam-rubber cushion,
unscrew the four screws and unplug all wires on Main Board
(Figure 20)
to remove
it and then remove the four M/B Spacers
(Figure 21)
.
Notice:
Before you unplug the FFC wires, tear off the tape on FFC wire first. Then
open the connector caps on panel carefully. Pull out the connectors caps on
Main Board carefully (Figure 20).
4 Disassembly of LCD Panel, Main and Inverter Boards
Main Board
Figure 21
Figure 20
FFC wires
LCD Panel
Left
Holder
Figure 22
Figure 23
Right
Holder
Summary of Contents for LCD1511M
