78
•
Use
navigation
key to move down to the
Time
field (when the function is toggled on) to set the auto on time.
•
Press
Left Softkey
to save the settings and return to the
Clock
menu screen. A tick in the check box indicates that the function is activated.
After a preset time elapsed, the function will indicate last 3 seconds of the countdown timer by a beep tone. At the end of the countdown time, a
special beep can be heard.
•
From the main menu, select
Accessory
>
Clock
>
Countdown
.
•
Press
Left Softkey
to set a desired duration for the countdown. Edit the countdown timer and press
Right Softkey
to save the setting. Press
Right Softkey
to start the countdown.
•
To pause the countdown, press
Right Softkey
. Press
Right Softkey
again to continue with the countdown.
•
To reset the countdown timers after pausing, press
Left Softkey.
From the main menu, select
Accessory
>
Clock
>
Stopwatch
. A maximum of two timings can be registered with the stopwatch.
•
Press
Left Softkey
to start the timing. To register the first timing, press
Left Softkey
. To register the next timing, press
Left Softkey
again.
•
To register only one timing with the stopwatch, press
Left Softkey
to start timing and
Right Softkey
to stop.
•
To reset all time counters, press
Left Softkey
.
You can perform addition, subtraction, multiplication and division of numbers with the calculator function. You can enter up to 8 digits. The calculator
can display a result of up to 9 digits, with a maximum of 6 decimal places.
If a calculation results in a number exceeding the maximum, “Over range” appears in the calculation field.
Calculator key
The following keys are assigned with different functions under the calculator:
•
navigation key: Addition (+)
•
navigation key: Subtraction (-)
•
navigation
key: Multiplication (x)
•
navigation key: Division (÷)
•
Left Softkey
: Equals to (=)
•
Right Softkey
: Clear
•
: Back to the standby screen
Countdown
Stopwatch
Calculator
