22
Insert the handsfree to the charger/earphone jack at the side of the phone. When there is an incoming call:
•
Under
Auto answer
mode, the call will be connected automatically.
•
Under manual answering mode, press key to connect the call.
When you receive a call:
•
The phone rings (if ring tone is set to ON).
•
The number of the calling party may be displayed on the screen if the caller has activated calling line identification.
•
The calling party’s number along with the name and caller ID picture may be displayed if the caller’s information is already stored in the
phonebook.
If the caller has withheld his/her caller ID, the message
“Restricted”
is displayed to show that the number is being withheld. If the network service
provider cannot identify the number, the message
“Unknown”
is displayed to show that number is not known.
When your phone is receiving MMS, the incoming call signal may be ignored. The caller may be notified that the line is currently
unavailable.
Accepting a call
•
Press
key
or
Left Softkey
.
You can set your phone to answer a call by pressing any key except
key. See “Answer options” on page 28. If you are making a call, the
phone gives priority to receiving a call unless you have already pressed
key.
Rejecting a call
•
Press
key
or
Right Softkey
. The call will be transferred to the voice mailbox automatically.
You can also choose to put your calls on hold or to activate
Call waiting
or
Call diversion
. These options are dependent on your network and
subscription plans with your local mobile service provider.
If a call is received but not answered, the screen will display an icon.
Information of received and answered calls are stored in
Received calls
.
Calling line identification is subscription dependent. If you have subscribed to the service and the caller has allowed his number to be
transmitted over the network, the number of the caller or the corresponding name will be displayed on the handphone screen.
Using handsfree
Receiving calls
