NEC IP3NA-BCH User Manual Download | Manualshive

Page: 34 / 57

background image

1 - 24

Adjusting the Bluetooth

®

Handset

You can adjust the volumes of various tones and the display density of the Bluetooth

®

hand-

set using the up and down cursor keys.

"

Adjusting the Receiver Volume

You can adjust the volume of the voice that is heard from
the handset.
Press the up and down cursor keys (up: high, down: low)
while you are talking on the handset.

"

Adjusting the Ring tone Volume

You can adjust the volume of the ring tone of the Blue-
tooth

®

handset.

Press the up and down cursor keys (up: high, down: low)
while the ring tone sounds.
If you want to adjust the ring tone volume while the ring
tone does not sound, do as instructed in “Ring Volume” in
“Configuring the Bluetooth

Handset (BTH)”

The ring tone OFF icon appears in the LCD screen if the
ring tone volume is turned off.

"

Adjusting the LCD Density

You can adjust the contrast of the LCD screen.
Press the up and down cursor keys (up: dark, down: light)
while the standby panel is on display.

Adjusting the Bluetooth

®

Handset

9'&2/
=?ć=A?
*0&ĀĀĀĀĀĀ

9'&2/

40)ĀĀĀĀĀĀĀĀ

9'&2/

.%&ĀĀĀĀĀ

«
...
32
33
34
35
36
...
»

Summary of Contents for IP3NA-BCH


























































Reviews:

No comments

Related manuals for IP3NA-BCH

Brand: Talkswitch Pages: 32

VOIP-500 Series

Brand: Talkaphone Pages: 90

Brand: GE Pages: 62

Brand: AT&T Pages: 10

Brand: Uniden Pages: 68

KIRK 14171914-HD

Brand: Polycom Pages: 76

Brand: Facebook Pages: 5

Clear Sound CL455

Brand: Geemarc Pages: 64

Brand: Aastra Pages: 131

Business Analog Telephone

Brand: Tekelec Pages: 145

Brand: BELGACOM Pages: 32

Brand: LEGRAND Pages: 3

Brand: Tellumat Pages: 8

Brand: VTech Pages: 47

TRU12803 Series

Brand: Uniden Pages: 68

Brand: Emerson Pages: 2

Brand: Emerson Pages: 28

Brand: Emerson Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands