![background image](http://html1.mh-extra.com/html/nec/ip3na-bch/ip3na-bch_user-manual_3915388037.webp)
1 - 27
Configuring the Cordless Terminal
On the Bluetooth
®
handset in standby mode, press the [HOLD] > [TRF] keys and then press
dial keys (1) to (6) to see a Setup Screen associated with the dial key pressed.
The table below lists the setting of each item.
Configuring the Bluetooth
®
Handset (BTH)
The handset will return to the standby panel automatically if 4 minutes pass with
the no action being launched from the menu.
Dial key
Item
Setting
([ ] default)
Explanation
(1)
Base Call
-
Allows you to call up the paired Blue-
tooth
®
cradle and identify it when it is
unknown.
(2)
Key Touch
Tone
• Disable
• [Enable]
Set ether to sound a confirmation tone
each time a key is pressed or not.
(3)
Ring Volume Off (0),
1 to [8] to 13
Adjusts the ring tone volume.
The ring tone OFF icon appears in the
LCD screen if the ring tone volume is
turned off.
(4)
No Service
Tone
• Disable
• [Enable]
Set ether to sound a no service tone when
no service occurs.
(5)
Low Power
Mode
• Disable
• [Enable]
Set ether to transition to low-power mode
automatically when no call or key opera-
tion has been launched for a long time.
(6)
Font Size
• [Double Height]
• Normal
Set ether to display the characters on the
two lines in the middle in the LCD screen
in double or normal height.
* Characters display in normal height
while a setup item is on display.
You cannot originate calls or answer terminating calls while the Bluetooth
®
menu setup is in progress. Exit the menu before originating calls or answering
terminating calls.
Caution
Caution