background image

1 - 29

Transforming the Standard Handset into a IP3NA-BCH ADAPTER( )

The IP3NA-BCH ADAPTER( ) is an optional device that transforms the standard multifunc-
tional telephone into a cordless terminal. This section explains how to transform the standard 
handset into a IP3NA-BCH ADAPTER( ).

"

Supported Telephone Type

The IP3NA-BCH ADAPTER( ) can be connected to the following types of telephone:

"

Replacement Procedure

1

Turn over the telephone.

2

Remove the standard handset.

Release the curl cord from the groove and out its modular plug from the HANDSET connector on 
the back of the telephone.

3

Lower the tilt legs to the first level.

Transforming the Standard Handset into 

a IP3NA-BCH ADAPTER( )

Telephone type

Description

Remarks

Digital multifunc-
tional telephone

• IP3NA-12/24 TXH TEL(WH/BK)
• IP3NA-8LTXH TEL(WH/BK)

Not connectable to the 
IP3NA-2TH TEL(BK) and 
IP3NA-6TXH TEL(BK)

If the IP3NA-BCH ADAPTER( ) is connected to a telephone, the following 
optional devices cannot be connected at the same time:

• IP3WW-APR ADAPTER
• IP3WW-ADA ADAPTER
• IP3NA-BHA ADAPTER
• IP3NA-PSA ADAPTER(WH/BK)

Caution

Summary of Contents for IP3NA-BCH


























































Reviews: