background image

Although NEC has taken all possible steps
to ensure that the documentation supplied
to our customers is complete, bug free
and up-to-date, we readily accept that
errors may occur.  Despite all the care and
precautions we've taken, you may
encounter problems in the documentation.
Please complete this form whenever
you'd like to report errors or suggest
improvements to us.

Hong Kong, Philippines, Oceania
NEC Electronics Hong Kong Ltd.
Fax:  +852-2886-9022/9044

Korea
NEC Electronics Hong Kong Ltd.
Seoul Branch
Fax:  02-528-4411

Taiwan
NEC Electronics Taiwan Ltd.
Fax:  02-719-5951

Address

North America
NEC Electronics Inc.
Corporate Communications Dept.
Fax: 1-800-729-9288

1-408-588-6130

Europe
NEC Electronics (Europe) GmbH
Technical Documentation Dept.
Fax:  +49-211-6503-274

South America
NEC do Brasil S.A.
Fax:  +55-11-889-1689

Asian Nations except Philippines
NEC Electronics Singapore Pte. Ltd.
Fax:  +65-250-3583

Japan
NEC Corporation
Semiconductor Solution Engineering Division
Technical Information Support Dept.
Fax:  044-548-7900

I would like to report the following error/make the following suggestion:

Document title:

Document number:

Page number:

Thank you for your kind support.

If possible, please fax the referenced page or drawing.

Excellent

Good

Acceptable

Poor

Document Rating

Clarity

Technical Accuracy

Organization

CS  96.8

Name

Company

From:

Tel.

FAX

Facsimile

 

 

Message

Summary of Contents for IE-784915-R-EM1


































































Reviews: