NEC IE-784915-R-EM1, User Manual

Page: 51 / 65

51
CHAPTER 2 CONNECTION
2.1.3 Connection of EP-784915GF-R and target system
The emulation probe and target system are connected in the following order.
Cautions 1. Before connecting the EP-784915GF-R with the target system, be sure to connect the earth
clips first. Without the earth clips, the IE-784000-R may be destroyed by static electricity,
etc.
2. Pay attention to inverse insertion of pins when making the connection.
Erroneous connection may destroy the IE-784000-R.
(1) Turn off the power of the target system.
(2) Solder the conversion socket (EV-9200GF-100 or NQPACK100RB) attached to the IE-78495-R-EM1 to the
target system.
(3) Connect the earth clips of the EP-784915GF-R to GND of the target system.
(4) Insert the EP-784915GF-R while aligning the 100-pin GF at the tip of the EP-784915GF-R and pin 1 of the
conversion socket (EV-9200GF-100 or NQPACK100RB) soldered to the target system in (2).