NEC IE-784915-R-EM1, User Manual

Page: 49 / 65

CHAPTER 2 CONNECTION
This chapter explains the method of connecting the EP-784915GF-R, powering-on/powering-off procedure, and
the method of removing the emulation probe from the target system.
2.1 Outline of Connection Procedure
(1) Connection of emulation board and I/O emulation board
(2) Connection of in-circuit emulator and emulation probe
(3) Connection of emulation probe and target system
(4) Connection of external sense clips (when external sense clips are used)
(5) Powering-on
Details of the connection procedure are given below.
2.1.1 Connection of IE-784000-R-EM and IE-784915-R-EM1
(1) Turn off the power of the IE-784000-R.
(2) Remove the cover of the IE-784000-R.
(3) Connect the IE-784915-R-EM1 to the IE-784000-R-EM.
(4) Insert the IE-784000-R-EM and IE-784915-R-EM1 in the IE-784000-R.
(5) Put the cover on the IE-784000-R.
2.1.2 Connection of IE-784000-R and EP-784915GF-R
(1) Connect the EP-784915GF-R to the emulation probe connection DIN connectors (CN1 and CN2 of the IE-
784915-R-EM1) on the IE-784000-R.
(2) After the connection, be sure to fix the EP-784915GF-R and IE-784000-R with fitting screws.
49