NEC IE-784000-R, User Manual

Page: 96 / 113

APPENDIX A SPECIFICATIONS
96
A.2 Basic Specifications as an In-Circuit Emulator
♦
Target device
µ
PD784026 subseries:
µ
PD784020, 784021, 784025, 784026, 78P4026
♦
Internal system clock
16 MHz MAX. (However, the clock may be less than 16 MHz depending on the target device.)
♦
Clock supply
The clock is supplied from the internal crystal oscillator of the IE-784026-R-EM1 and target system.
♦
Memory
• Alternate memory capacity
Internal ROM and alternate memory: 1M bytes (0 wait, except SFR internal RAM)
• Mapping units
Peripheral RAM : 32K bytes MAX.
Internal ROM : 8K-byte units
Alternate memory : 4K-byte units
Peripheral RAM : 256-byte units
♦
Event detection
• Bus event detection condition : Detects data read/write or program fetch operation. Can be set
by mask data (address/data/status/external data signal).
• Program execution detection condition : Detects program execution at any address. Four points can be
set (address/external data signal).
• External data detection condition : Detects that external sense clips 1 through 4 have reached
predetermined levels.
Can be set by mask data.
• External trigger output : High-level signal is output from TRGOUT pin when external
trigger condition is satisfied.