NEC IE-784000-R, User Manual

Page: 112 / 113

APPENDIX C JUMPER SETTING
112
C.2 Setting Jumper on Emulation Board
The factory-set conditions of the jumper on the emulation board (IE-784000-R-EM) are as follows:
Table C-2 Jumper Setting (factory-set conditions)
Board Jumper No. Setting
Emulation board JP1 Shorted
Caution If the factory-set condition of the jumper is changed, the emulation board does not operate
correctly. Do not change the factory-set conditions of the jumper, because it does not have to
be changed for ordinary use.
Fig. C-2 Location of Jumper on Emulation Board
Component side
JP1