Chapter 3 MMI Configuration
16
2.
Press the
MENU/EXIT
key, then use the
UP
and
DOWN
keys to switch from
YES
/
NO
. Press
SELECT
again to
confirm or to cancel and return to previous menu level.
Note:
If you have more than one SIP account, repeat the settings in step 1 to configure additional SIP accounts.
For SV8300
1.
Select one of the ten SIP accounts to display the submenu. The following items are required:
Registration:
Enable / disable this account, set to
“Enable” on SV8300.
Send Register:
Enable / disable sending SIP account information, set to
“Enable” on SV8300.
Reg. ID:
Input the registration ID, it is
“Extension number” registered on SV8300.
Display Name:
Input the user name. The user name will be shown on the terminal display when the phone is
idle.
Auth. Name:
Input the Authentication Name used for authentication. It can be identical to or different from SIP
Registration ID. It is
“Extension number” registered on SV8300
Password:
Input the register password.
Reg. Server:
Input the registration server IP address,
“(IP Address of SV8300): (port number)”, a port number
is required. The default value of the SV8300 is
“5070”
Reg. Port:
Input the registration server Port.
Proxy Server:
Input the proxy server IP address.
Proxy Port:
Input the proxy server port number.
Outbound Proxy:
Input the outbound proxy server IP address.
Outbound Proxy Port:
Input the outbound proxy server port number.
Expire time:
User can set the timeout duration for registration request, it should be
“120” or more.
DTMF Type
: Input the DTMF type options: RFC2833 / In-Band
Keep Alive
: To keep connected to the server by period time.
Typically enabled to instruct the phone to send
SIP keep-alive message for maintaining a “pinhole” in the user’s firewall through which SIP messages can pass.
MWI
: Enable / disable to ask server auto provide Message Waiting Indicator.
Voice Mail:
Input the speed dial number for your SIP reg. server or IP-PBX Voice Mail system.
Save:
To save your settings.
2.
Press the
MENU/EXIT
key, then use the
UP
and
DOWN
keys to switch from
YES
/
NO
. Press
SELECT
again to
confirm or to cancel and return to previous menu level.
Note:
If you have more than one SIP account, repeat the settings in step 1 to configure additional SIP accounts.
For SV8100
1.
Select one of the ten SIP accounts to display the submenu. The following items are required:
Registration:
Enable / disable this account, set to
“Enable” on SV8100.
Send Register:
Enable / disable sending SIP account information, set to
“Enable” on SV8100.
Reg. ID:
Input the registration ID, it is
“Extension number” registered on SV8100.
Display Name:
Input the user name. The user name will be shown on the terminal display when the phone is
idle.
Auth. Name:
Input the Authentication Name used for authentication. It can be identical to or different from SIP
Registration ID. It is
“Extension number” registered on SV8100
Password:
Input the register password.
Reg. Server:
Input the registration server IP address,
“(IP Address of SV8100): (port number)”, a port number
is required. The default value of the SV8100 is
“5070”
Reg. Port:
Input the registration server Port.
Proxy Server:
Input the proxy server IP address.
Proxy Port:
Input the proxy server port number.
Outbound Proxy:
Input the outbound proxy server IP address.
Outbound Proxy Port:
Input the outbound proxy server port number.
