Chapter 3 MMI Configuration
14
VLAN Setting
To configure the VLAN setting, press the
SELECT
key to access the submenu options and perform necessary functions.
1.
Press the
SELECT
key to enter the VLAN setting submenu options.
Switch
:
Select this option to enable/ disable VLAN connection.
Identifier
:
Select this option to set up VLAN settings ID.
Priority
:
Select this option to set the priority level (0-7).
2.
Use the
UP
and
DOWN
keys to select and set the VLAN settings.
3.
Press the
MENU/EXIT
key, then use the
UP
and
DOWN
keys to switch from
YES
/
NO
. Press
SELECT
again to
confirm or cancel and return to the previous menu level.
DNS Setting
Use to enter the IP address of DNS server(s). A maximum of 2 DNS servers can be entered. To enable the function:
1.
Press the
SELECT
key to enter the submenu.
2.
Use the up and down arrow keys to select
Primary
and
Secondary DNS
.
3.
Press the
MENU/EXIT
key, then use the
UP
and
DOWN
keys to switch from
YES
/
NO
. Press the
SELECT
key
again to confirm or cancel and return to the previous menu level.
Note:
DNS setting is only available when using the static IP setting. DNS setting is not available when the PPPoE or DHCP
IP setting is selected.
NTP & Time
The NTP & Time Setting allows you to configure the date and time of the VoIP phone manually or synchronize the clock with
the NTP (Network Time Protocol) server, and specify the time zone you are in. The NTP function should be disabled if you
want to set the date and time manually.
Select this option to enable/ disable NTP server connection.
Note:
SV systems cannot be used as the NTP server.
Daylight Saving
To set the Daylight Saving feature:
1.
Press the
SELECT
key to enter the submenu.
2.
Input the start month, start week, start day, start time, end month, end week, end day, and end time.
3.
Select
Switch
to enable or disable this function and press the
SELECT
key to confirm.
4.
Press the
MENU/EXIT
and use
UP
and
DOWN
keys to switch from
YES
/
NO
. Press the
SELECT
key again to
confirm or cancel and return to the previous menu level.
Save & Restart
Select this option to save settings and restart the network.
S
S
I
I
P
P
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
System Settings enables you to configure the phone system.
Port Setting
Enter the SIP port number and the RTP port number provided by your ITSP or MIS.