1. POST Error Message
Express5800/R120g-1E Maintenance Guide
192
Chapter 3 Appendix
Error Message
Cause
Solution
B01D
Expansion ROM not
initialized - PCI
Slot 1D
Option ROM expansion in PCI slot
1D failed.
Disable expansion of option ROM of the
option board that is not used for OS boot.
Run SETUP, and select
Advanced
→
PCI
Configuration
→
PCI Device Controller and
Option ROM Settings
→
PCIxx Slot Option
ROM
→
Disabled
. (xx: PCI slot number)
B01A
Expansion ROM not
initialized - PCI
Slot 1A
Option ROM expansion in PCI slot
1A failed.
B022 Serial
Port
Configuration
Overlapped.
Overlapping serial port
configuration was detected.
Start SETUP, select
Advanced
→
Serial Port
Configuration
, and specify the setting again in
a way that the values of Base I/O or Interrupt in
Serial Port A
and
Serial Port B
will not be the
same.
B030
PCI System Error on
Bus/Device/Function
PCI SERR was detected.
Contact your sales representative.
B040
PCI Parity Error on
Bus/Device/Function
PCI PERR was detected.
B200
Onboard VGA – PCIe Link
Failure
Connection failure of PCIe bus was
detected on Onboard VGA.
B211
PCI Slot 1A - PCIe Link
Failure
Connection failure of PCIe bus was
detected on PCI slot 1A.
B212
PCI Slot 1B - PCIe Link
Failure
Connection failure of PCIe bus was
detected on PCI slot 1B.
B215
PCI Slot 1C - PCIe Link
Failure
Connection failure of PCIe bus was
detected on PCI slot 1C.
B218
PCI Slot 1D - PCIe Link
Failure
Connection failure of PCIe bus was
detected on PCI slot 1D.
B220
Onboard VGA – PCIe Link
Width Error
A Link Width error was detected on
Onboard VGA.
B231 PCI
Slot 1A - PCIE Link Width
Error
A Link Width error was detected in
PCI Slot 1A.
B232 PCI
Slot 1B - PCIE Link Width
Error
A Link Width error was detected in
PCI Slot 1B.
B235 PCI
Slot 1C - PCIE Link Width
Error
A Link Width error was detected in
PCI Slot 1C.
B238 PCI
Slot 1D - PCIE Link Width
Error
A Link Width error was detected in
PCI Slot 1D.
B260
Onboard VGA – PCIe Link
Speed Error
Link Speed error was detected on
Onboard VGA.
B271 PCI
Slot 1A - PCIe Link Speed
Error
Link Speed error was detected on
PCI Slot 1A.
B272 PCI
Slot 1B - PCIe Link Speed
Error
Link Speed error was detected on
PCI Slot 1B.
B275 PCI
Slot 1C - PCIe Link Speed
Error
Link Speed error was detected on
PCI Slot 1C.
B278 PCI
Slot 1D - PCIe Link Speed
Error
Link Speed error was detected on
PCI Slot 1D.
B800
DXE_PCI_BUS_OUT_OF_RESOURCES
Resources to be allocated to PCI
expansion card was insufficient.
C000
The error occurred during
fan sensor reading.
An error was detected while
reading fan sensor.
C010
The error occurred during
temperature sensor reading
An error was detected while
reading temperature sensor.
C011
System Temperature out of
the range.
A temperature abnormality was
detected.
The cooling fan has failed or is clogged.
Contact your sales representative.
C020
The error occurred during
voltage sensor reading.
An error was detected while
reading voltage sensor.
Contact your sales representative.
C021
System Voltage out of the
range.
A system voltage abnormality was
detected.
Summary of Contents for Express5800/R120g-1E
Page 223: ...MEMO...