background image

License Agreement Notice 

 

Express5800/R120e-1M, R120e-2M  Maintenance Guide 

9

 

License Agreement Notice 

Open source software of following license is included in the part of this product (system BIOS). 

 

 

 

EDK FROM TIANOCORE.ORG

   

 

BSD License from Intel   
 
Copyright (c) 2004, Intel Corporation   
 
All rights reserved.   

 
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the 
following conditions are met:   

 

 

Redistributions of source code must retain the above copyright notice, this list of conditions and the following 
disclaimer.  

 

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the 
following disclaimer in the documentation and/or other materials provided with the distribution.   

 

Neither the name of the Intel Corporation nor the names of its contributors may be used to endorse or 
promote products derived from this software without specific prior written permission.   

 

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY 
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED 
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR 
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY 
WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH 
DAMAGE.  
 
Copyright (c) 2004 - 2007, Intel Corporation   
All rights reserved. This program and the accompanying materials are licensed and made available under the 
terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be 
found at http://opensource.org/licenses/bsd-license.php  
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT 
WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.   
 

 

Summary of Contents for Express5800/R120e-1M



























































































































































Reviews: