1. System BIOS
Express5800/R120e-1M, R120e-2M Maintenance Guide
88
Chapter 2 Convenient Features
1. When BIOS detects a bootable device, information on the device is displayed in the designated area.
2. The boot priority (from first to forth) of the registered boot devices can be changed using the <
↑
>/<
↓
>
and <+>/<
−
> keys.
Move the cursor to a device using the <
↑
>/<
↓
> keys, and change the priority using the <+>/<
−
> keys.
Note
When SATA Hard Disk Drive is used in IDE mode, the default boot priority in Hard
Drive BBS Priorities is set as follows.
Hard Disk Drive Slot 0
Hard Disk Drive Slot 2
Hard Disk Drive Slot 1
Hard Disk Drive Slot 3
If the HDDs in Hard Disk Drive Slot 0 and Hard Disk Drive Slot 1 are switched, for
example, the boot priority of HDD may change. If this happens, execute
Load
Setup Defaults
in the
Save & Exit
menu, clear the settings of the boot priority to
the default settings, and then configure the priority again.
When SATA HDD is used in IDE mode, the boot priority of HDDs with the same
serial number cannot be changed. .
Tips
•
If a bootable device is newly connected, the priority lowest in its BBS
Priorities is assigned to that device.
•
If a bootable device is disconnected from the server, the relevant device is
removed from BBS Priorities.
•
When
Load Setup Defaults
is executed on
Save & Exit
menu, the
Boot
Option
and
BBS Priorities
are changed as follows.
¾
Boot Option Priorities
Boot Option #1: CD/DVD ROM Drive
Boot Option #2: Floppy Drive
Boot Option #3: Hard Drive
Boot Option #4: Network Device
¾
The priority of bootable devices in BBS Priorities are determined as
follows:
Devices other than USB device (e.g., SATA device, RAID): High
USB device: Next to non-USB devices
¾
If a bootable device has been set to
Disabled
, cancel the Disabled
status, and register the device in
BBS Priorities
.
•
If a Remote Management Extended License (*1) is registered, the remote
media is added to bootable devices. The remote media is assigned as
follows:
¾
The highest priority within "CD/DVD ROM Drive BBS Priorities" is
assigned to AMI Remote CD/DVD device.
¾
When executing Load Setup Defaults in Save & Exit menu, the highest
priority within "CD/DVD ROM Drive BBS Priorities" is assigned to AMI
Remote CD/DVD device.
(*1) Refer to
EXPRESSSCOPE Engine 3 User's Guide
for details of Remote Management Extended License.
