1. Installing Internal Optional Devices
Express5800/B120e User's Guide
64
Chapter 2 Preparations
1.7.4
Resetting Management Information
Reset the management information on the replaced Hard Disk Drive in the following procedure.
1. Select
Settings
→
Control Panel
→
NEC ESMPRO Agent
from the
Start
menu.
NEC ESMPRO Agent Properties
is displayed.
2.
Click on the
General
tab in
NEC ESMPRO Agent Properties
.
3. Select
Storage Setting…
in the
General
tab.
Storage
is displayed.
4.
Click on the
Reset
tab in
Storage
.
5.
After selecting the replaced Hard Disk Drive in
Hard disk drive list
, click on
OK
. (The Hard Disk
Drives are also listed in
Hard disk drive list
.)
The management information on the replaced Hard Disk Drive is reset.
6.
Close the dialog box.
7. Close
NEC ESMPRO Agent Properties
.
