NEC Express5800/B120e User Manual Download

Page: 23 / 104

1. Introduction

Express5800/B120e User's Guide

Chapter 1 General Description

Introduction

Welcome to the NEC Express5800/BladeServer series server.

This high performance and high density server is powered by the latest microprocessor "Intel

Xeon

processor.

NEC’s latest technology and architectures realize more space-saving and reduction of running cost than ever.

The server is designed with consideration of not only reliability but also expandability, which enables you to use
it as a network server.

Read this document before using the server thoroughly to fully understand handling of Express5800 Series
Server and appreciate its functions to the maximum extent.

Summary of Contents for Express5800/B120e









































































































Search results

Summary of Contents for Express5800/B120e

Reviews:

Related manuals for Express5800/B120e

Brands by name

Popular brands

NEC Express5800/B120e, User Manual

Search results

Summary of Contents for Express5800/B120e

Reviews:

Related manuals for Express5800/B120e

Brands by name

Popular brands